My Interpretation of the famous Booga Bag


WOW! That is fabulous!!! LP is one of my favorite yarns.

Would it be too much trouble for you to post how you did the lining and the magnetic closure? Lots of people (me included!) seem interested.

It looks very professional; you did a great job!

:inlove: It looks fantastic!! I hope that’s for you!!!

Purple is my favorite too!! :inlove:

Okay, by popular demand how I lined my bag:

Discalimer: I can sew but I’m not a pro, if you saw it up close I could point out how my lining is less than perfect- but it’s on the inside so who cares? Also giving instructions is a bit intimidating because there my be some super professional seamstress lurking out there who will say “Why did she do that??!!” I will try to be very simple and complete for the non-sewers, if you sew a bit and know what I’m talking about bear with me.

I started by buying matching fabric. I used about a quarter yard but had to actually cut a bit more than thst so I could have the design on the fabric going all the same direction. I have made mistakes cuting out linings before so buy at least 1/2 yard to a yard to be safe, if you have left over you might beable to use it in another project.
Next I bought interfacing, this is under the brand name “Pelon” and is available on bolts at the fabric store. It comes in different thickness. Mine was “craft” thickness I think, very stiff. Infact it was so stiff I was a bit doubtful, but thought well, I want it to be stong… I think I made a good choice in the end.

Prewash your fabirc. It will shrink. Then iron it before beginning to sew. In this way I can now in gentle cold wash my bag should it get dirty. If I didn’t pre-wash, the lining might shrink in the process.

I measured the bottom of the bag and cut a square of fabric and interfacing together in that demention adding 5/8" to the dimension on all four sides. I did the same with each side piece (don’t forget the 5/8th on each side!) Actually the front and back are the same size and the sides are same size so I was able to cut two peices of fabric and four interfacings all at the same time. Saves cutting.

Note on cutting- when I was done my peices were bit crooked. I’m not the straightest of cutters, but I can sew straight and the seams fixed all that for me, but do your very best to cut straight- I was in a bit of a hurry too.

The interfacing is iron on. For this purpose make sure you buy the iron on kind. Following the instructions that comes with the interfacing I ironed it onto the wrong side of all pieces of fabric.

I then sewed each side to the bottom. I used a sewing machine. I sewed using a 5/8th seam allowance - remember I allowed extra when I started out? If you don’t have a machine or don’t know how to use one I suppose you could do this by hand. But hand sewing is tedious and I’m not that great at it. It would work if you could make tiny stitches and had lots of patience but I wouldn’t recommend it. I would recommend learning to use a sewing maching- it’s easy, honest. Easier than knitting I think!

After I sewed each bottom end to the bottom of the bag I seamed up the sides. This is where I goofed. I thought I’d cross my seams at the corners but I shouldn’t have; it made my corners tricky. At this point it’s good to iron down the seam allowance, this would be on the wrong interfacing side. However, I did not have to do this as the interfacing was so stiff that I was able to neatly fold it like construction paper. I also trimmed off a lot of the seam allowance close to the seam and especailly the corners, that makes a sharper corner and makes it fit better in the bag.
Also the stiff interfacing made my lining look like a box at this point. My daughter even thought I was making a box. Softer interfacing will have more give to it.

I then folded down the top to make a hem. Remember I cut things out crooked? So some sides were taller than others, but I was able to fold it all to the same height, trim off excess material and using the machine stitch a hem.

For most bags at this point I would just sticth by hand the lining to the bag. But the Booga Bag presents a special challenge: The handles. I had puzzled over this for a couple days before beginning. I finally decided to do this: I insterted my lining, lined it all up. Folded the bag and the lining together as instructed in the origianl booga bag pattern for shaping. I then marked on the interfacing side where I needed holes. It needed 8 holes! I decided to make button holes in these spots. My machine is a hand me down from grandma- holes are tedious. New machines I think will just make a button hole if you tell it to (Well it’s supposed to be easier anyway.) So I made button holes, they were pretty lame if you want to know the truth. Plus I was on the phone with my mom at the same time. Sigh. I then snipped the fabric inside the button holes and had openings. I didn’t want super big ones, some were too small. If I hadn’t been on the phone I might have done better. So once all the holes were made I put the lining back in the bag and punched/cut holes in the booga bag and threaded the handle.

At this point I inserted the magnetic closure. It require snipping the fabric per package instructions, slipping the device through, placing a cover over the prongs and bending the prongs down with pliers. I had to do this on both sides of the bag, of course. I hadn’t ever used a magnetic closure but it was very easy. The back of the closure is between the fabric and the knitting. One could instert a closure into a little square of fabric. sew the fabric to a knitted bag and then have a closure without a lining, if one wanted.

Then I hand stitch the lining into place around the top.

If I was to do this again I might try putting rivits for the holes. I have not ever done this before I looked at the tools and supplies for this in the fabric strore- I didn’t price it but it’s one of those things I decided not to buy because how often will I rivet something??? But It would make nice smooth holes and save one button hole anxiety. Maybe someone should try this and let me know how it works…

So that’s how I did it. Really it’s not 100% perfect, but it is sturdy and I think for my purposes it will hold up. If I was giving it away I might have tried to be a tiny bit neater.


Thanks everyone for all the nice comments.